- Home /
- CRC/ADOS Products /
- Corrosion Prevention Compounds /
- STAINLESS STEEL + ZINC 400ML
Shop Now
- Autopilot System
- Battery Accessories
- Battery and Tank Monitoring
- Battery Chargers
- Bilge Pump and Water Pump
- Charts
- Compasses
-
CRC/ADOS Products
- Additives-Fuel/Oil/Radiator
- Adhesives/Solvents
- Aerosol Paints
- Brake Cleaners
- Car Care
- Cleaners and Degreasers
- Corrosion Prevention Compounds
- CRC 5.56 Marine Multi Purpose Lubricants
- CRC Specialty Products
- Epoxies and Resins
- Epoxy Mortar
- Fillers
- Food Grade Range
- Gasket/Joint Compounds
- Grooming/Valet
- Lubricants/Silicone Sprays/Grease
- Outdoor Cleaners
- Sealants
- Diesel Heating and Cooking
- Electrical Accessories
- Enerdrive Power Systems
- Inverters
- Inverters Chargers
- Jump Starters
- LED Worklights
- Lithium Batteries
- Marine Antennas
- Marine Audio
- Marine Cameras
- Marine Instruments
- Marine Lighting
- Marine Mounting Systems
- Marine Steering Systems
- Multifunction Displays
- Network
- Radars
- Remote Contolled Spotlights
- Salt Removal
- Satelite TV Systems
- Solar Products
- Thruster Systems
- Transducers
- Trim Tab Systems
- VHF Radios
Brands
STAINLESS STEEL + ZINC 400ML
Overview
CRC Stainless Steel+Zinc’s unique formulation combines superior rust inhibiting properties of zinc with a tough but flexible enamel coating for heavy-duty protection and a hard-wearing stainless steel finish.
Pure zinc particles and stainless steel flakes are embedded in a resin system which forms a quick-drying highly-protective enamel coating on bare metal. Stainless steel rises to the surface to provide a durable stainless steel finish over a zinc rich base in the dried film.
This organo-zinc coating provides an effective barrier for protection of treated surfaces from environmental conditions like moisture, humidity, water and heat while the zinc particles – due to sacrificial anodisation of zinc – stop rust and rust creepage if the coating is scratched, abraded or dented.
CRC Stainless Steel+Zinc provides a gloss top-coat finish but unlike standard paint systems, resists undercutting and blistering from corrosion.
For ultimate protection, prime the metal surface with CRC Zinc It then apply CRC Stainless Steel+Zinc as a top coat.
CRC Stainless Steel+Zinc provides excellent cover and is capable to be applied as a heavy film for extra protection without forming runs, delivered from a unique aerosol system giving a smooth even coat.
Ongoing protection can be achieved through simple re-coating within 5 years, depending on conditions. Protection in extreme conditions may require re-application more frequently.
Features & Benefits:
Zinc-rich – More than 50% highest purity zinc in the dried film, embedded in a protective enamel coating
Contains Stainless Steel – For durable stainless steel finish, no need for top-coating
Protective Coating – Resistant to salt corrosion, water and heat. Powerful protection in harsh conditions
Excellent adhesive qualities – Forms a tough coat for long-term protection
Easy application – High film build in one step
Heavy-duty – Resistant to salt corrosion, water and heat. Powerful protection in harsh conditions
Heat Resistance – Up to 120°C
Long-term corrosion protection – Corrosion Protection Factor 60 (up to 5 years outdoors before recoating is necessary, depending on conditions)
Sacrificial anodisation of Zinc – Stops rust and rust creepage even when scratched, abraded or dented
Fast drying – Touch dry in 20 minutes, recoat immediately, full cure in 24 hours
Easy re-application over existing film and/or clean surfaces – For ongoing protection
Single coat – No overcoating required. For additional protection, prime the metal surface with CRC Zinc It prior to applying CRC Stainless Steel+Zinc
Ready to Use Aerosol – No additional mixing or chemical additives required. Easy application. No clean up.
Does not contain CFCs, methylene chloride
MPI Approved C23