- Home /
- CRC/ADOS Products /
- Lubricants/Silicone Sprays/Grease /
- CRC DRYLUBE 500ML
Shop Now
- Autopilot System
- Battery Accessories
- Battery and Tank Monitoring
- Battery Chargers
- Bilge Pump and Water Pump
- Charts
- Compasses
-
CRC/ADOS Products
- Additives-Fuel/Oil/Radiator
- Adhesives/Solvents
- Aerosol Paints
- Brake Cleaners
- Car Care
- Cleaners and Degreasers
- Corrosion Prevention Compounds
- CRC 5.56 Marine Multi Purpose Lubricants
- CRC Specialty Products
- Epoxies and Resins
- Epoxy Mortar
- Fillers
- Food Grade Range
- Gasket/Joint Compounds
- Grooming/Valet
- Lubricants/Silicone Sprays/Grease
- Outdoor Cleaners
- Sealants
- Diesel Heating and Cooking
- Electrical Accessories
- Enerdrive Power Systems
- Inverters
- Inverters Chargers
- Jump Starters
- LED Worklights
- Lithium Batteries
- Marine Antennas
- Marine Audio
- Marine Cameras
- Marine Instruments
- Marine Lighting
- Marine Mounting Systems
- Marine Steering Systems
- Multifunction Displays
- Network
- Radars
- Remote Contolled Spotlights
- Salt Removal
- Satelite TV Systems
- Solar Products
- Thruster Systems
- Transducers
- Trim Tab Systems
- VHF Radios
Brands
CRC DRYLUBE 500ML
Overview
CRC Drylube with PTFE is a high-performance dry film lubricant that is applied wet and quickly dries to a non-staining micro-thin film of submicron PTFE particles. It is formulated for extreme heavy loads, sliding mechanisms and open gears in applications where the use of wet lubricants is not desirable. It penetrates and bonds to metal and most other surfaces and can be used on equipment in operation for uninterrupted workflow.
CRC Drylube with PTFE prevents sticking reducing friction, heat and wear with a very low coefficient of friction over a wide temperature range. It prevents galling or seizing and will not melt, freeze, run, pool or contaminate in-process materials.
Food Grade option available for this product
Features & Benefits:
Extreme pressure lube – Premium performance lubricant for heavy loads, metal-on-metal sliding on flat surfaces, open gear systems.
Dries fast – Does not interrupt workflow. Designed for applications in clean industries where the use of wet lubricants is not desirable.
Resists dust and dirt – For lubrication in dusty environments where contaminants might interfere with conventional wet lubricants.
Does not wash or drip off – Excellent adhesion to metal, wood, rubber, plastic, glass and most other surfaces.
Excellent chemical resistance – Effective in difficult conditions.
Temperature Range – Effective from -20°C to +250°C.
MPI Approved C11
Uses:
Machine bed lubrication
Saw benches
Extreme heavy loads
Sliding mechanisms
Open gears/bearings
Packaging machinery
Excellent mould release and parting agent
Paper, textile and plastics manufacturing industries where direct contact is involved with surfaces which would be contaminated by wet or silicone based products