CRC ETCH-10 Primer 1x300g

Part No:
1756401
POA

Overview

CRC ETCH-10 300g
DESCRIPTION
NEW!

CRC ETCH-10 is a high-performance Red Oxide Vinyl Etch Primer designed for superior adhesion & corrosion resistance on various metal surfaces. (Ferrous & Non-Ferrous). CRC ETCH-10 is ideal for key-coating metals, bare aluminium, stainless steel, brass, copper & galvanised metal surfaces. CRC ETCH-10 can be overcoated with most standard decorative paint systems for metals.

Applications
Industrial manufacturing, fabricating. Boat or Vehicle building. Suitable for use on Ferrous & Non-Ferrous metals.

CRC ETCH-10 is a high-performance Red Oxide Vinyl Etch Primer designed for superior adhesion and corrosion resistance on various metal surfaces (Ferrous & Non-Ferrous).

CRC ETCH-10 is ideal for key-coating metals, bare aluminium, galvanised metal surfaces, stainless steel, brass and copper. CRC ETCH-10 can be overcoated with most standard decorative paint systems for metals.

Surface Preparation:

  1. Remove signs of corrosion with a wire brush or emery paper or similar
  2. Clean surface with CRC Brakleen or similar degreaser if required
  3. Where possible, abrade surface with disc grinding, wire brush or sandpaper

Application & Directions:

  1. Shake can until the agitator ball is moving freely and then for at least 1 further minute to ensure content is thoroughly mixed
  2. Apply with smooth even strokes to a clean dry surface holding can approximately 25cm from surface until desired coverage is achieved
  3. When finished spraying, clean valve by turning can upside down and pressing button until only pressure escapes
More Information
Appearance Red liquid (aerosol dispensed)
Barcode 9310832026323
Brand CRC
Item Number 1756401
Unit Depth (mm) 65
Unit Height (mm) 205
Unit Package Description 300g Aerosol
Unit Width (mm) 65
Units per Case 6